Expert Answers about Bimini Top Parts
- Will The SureShade Power Bimini Top Fit on a Seadoo Switch Pontoon Boat?
- The SureShade Power Bimini Top # SS99TR is not going to fit your Seadoo Switch as it requires a rail width of 92-102" wide on center. Your Seadoo Switch has an exteror width of 93.5" putting the rail centers to narrow to fit.
view full answer... - Will the Chrome Taylor Made Sidewall Mounts Work with the Nylon Sliders or is There Stainless Steel
- Yes, the Taylor Made Bimini Top Deck Hinges for Boat Sidewalls # 3695854 (chrome) will work with the Replacement Nylon Sliders for Taylor Made Bimini Top Slide Assemblies # 3691205.
If you are wanting stainless steel, you would want the Taylor Made Bimini Top Deck Hinge for Boat Sidewalls # 36911735. It is important to note that the stainless steel is a quantity of 1, so you would need to purchase 2. The chrome comes as a quantity of 2.
view full answer... - Can Bimini Top Be Installed at Front of 2020 Bentley Elite 22
- As long as you have enough room to mount the SureShade Power Bimini Top for Pontoon Boat # SS87TR and have it work properly I see no reason why this would be an issue.
The mounting bracket requires holes to be drilled into your frame 16" apart on center (be sure to check for wires inside your frame) and then the orientation of the framing matters as well (see attached photo).
I'm linking the instructions of this top for you to check out.
view full answer... - Is Taylor Made Internal Eye Ends for 3/4" Bimini Top Poles For Inside Diameter
- The Taylor Made Internal Eye Ends for 3/4" Bimini Top Poles # TM88YR is for the 3/4" inside diameter of your pole.
view full answer... - Recommendation For Rotating Boat Mirror That Clamps On To 1-1/4 Inch Square Tube
- The CIPA Concept II Rearview Boat Mirror, Item # CM11071, will clamp to square or round frames. It is designed to fit windshield frames but should work with the Bimini top support. It fits frames from 3/8 inches to 1-1/4 inches and can also be permanently mounted. I contacted the manufacturer and mounting vertically will not be an issue other than you may have some limited rotation since the rotation component is designed for a horizontal mounting. This mirror only comes in white.
view full answer... - Replacement Soft Top and Doors For 1995 Jeep Wrangler
- I do have an option for you but I contacted Bestop (they manufacture the Pavement Ends Flip Top now) and the Pavement Ends Flip Top Soft Top for Jeep part # PE4458715 is only for the 1997-2006 Jeep Wranglers so the hardware is not the same.
The Pavement Ends Flip Top for the 1995 Jeep Wrangler is no longer in production, the only option is to replace the whole soft top and doors unfortunately. I recommend to replace it with Rampage Complete Soft Top Kit for Jeep - Upper Doors Included...
view full answer... - Replacement Soft Top Kit for a 1980 Jeep CJ-5
- The correct replacement soft top kit for your 1980 Jeep CJ-5 is the Bestop Supertop Soft Top for Jeep part # B5159715 for black denim, part # B5159701 for black, or part # B5159704 for tan. This system features a 23 oz fabric compared to the 18 oz fabric included with the Rampage soft top kit and it includes the doors unlike the Rampage soft top kit.
The Rampage Complete Soft Top Kit part # RA68035 will not work with your CJ-5 as it is designed for YJ models. I have attached a review video...
view full answer... - Top and Bottom Spar Hanger for Thule T2 Classic Bike Rack
- Yes, we do have the part you are looking for - the matching top and bottom spar hangers. The parts are as follows:
- Replacement Bottom Spar Hanger for Thule T2 Classic Bike Platform Rack # 753358402
- Replacement Top Spar Hanger for Thule T2 Classic Bike Platform Rack # 853595202
view full answer... - Will Soft Top For 1995 Jeep YJ Fit On 1969 Toyota Land Cruiser YJ40
- The soft tops for your 1995 Jeep YJ like part # B5159915 are not designed to fit your 1969 Toyota Land Cruiser FJ40.
The top that is designed to fit your FJ40 is the Bestop Supertop Soft Top, part # B5146415. This Black Denim system includes the fabric top, support bars, hardware and Belt-Rail system and is designed to fit FJ40 models from 1964 to 1984.
view full answer... - Which Soft Top Works for a 1983 CJ7?
- Part # B5579915 works for your application. This product uses the channel system and is a confirmed fit for your 1983 CJ7. If you want to switch to an all black roof and half door, then part # B5179515 is the black top to your half door. From your picture it looks like you have a tan roof, if you're wanting to keep tan part # B5572937 is what you need. We do not offer the top of the doors in that color currently.
view full answer... - Can Doors on Bestop Jeep Top for the 1965 CJ-5, Part # B5159515, Be Split for Use with Bikini Top?
- I spoke to my contact at Bestop concerning your question about being able to use just the bottom portions of the doors on Bestop Jeep Top for the 1965 CJ-5, part # B5159515, on your (awesome) 1965 CJ-5 when you are using your bikini top. Yes, you can do this.
I have attached installation instructions for both products for your review in case you wish to familiarize yourself with the installation process ahead of time.
view full answer... - Tinted Window Kits for a 2002 Jeep Wrangler Sahara
- The tinted windows, # B5869935, are designed to fit the Bestop Sunrider tops B51699 and B51719. The only other tinted window kits available for a 2002 Jeep Wrangler is # B5869915 and # B5812115. The first one fits Replace-A-Top B51121, B51124, B51127. The second one fits Sunrider B51699 and B51719 tops. If you have any of these top part numbers, the respective tinted window kits will fit.
Tinted window kits designed specifically to fit factory soft tops are not listed from Bestop. However,...
view full answer... - Availability of Tailgate Bar for 1997 Jeep Wrangler
- The Bestop Replacement Tailgate Bar, part # B5260101, you have referenced is for a 2007 to 2009 Jeep Wrangler and Wrangler Unlimited. This part is just the bar that runs across the top of the tailgate and gives you an attachment point for the rear window of a Trektop soft top # B5680435. This bar allows you to open the tailgate of your Jeep without opening or removing the rear window. It does not fit a 1997 Jeep Wrangler.
For your 1997 Jeep Wrangler you need the Bestop Replacement Tailgate...
view full answer... - Trailer With Crossbars To Setup Yakima SkyRise Roof Top Tent
- I do have an option for you but The Detail K2 Mighty Multi A-Frame Trailer part # K2MMT5X7 is not designed to be used with cross bars and cannot support the a roof top tent like Yakima Sky Rise part # Y07437. The Sky Rise gets most of it's support from the way the roof rack is installed on the roof. For example Yakima does not recommend using the Sky Rise on roof rack's that do not install on vehicle's raised side rails or fixed mounting points.
I recommend to use the Yakima EasyRider...
view full answer... - Can the Dexter Trailer Axle Beam Part # 8327830 Be Used with a Top Mounted Leaf Spring
- In order to use the Dexter Trailer Axle Beam part # 8327830 with leaf springs mounted on top you would need to weld on new spring seats with part # TRSS300. The reason for this is that the existing spring seats are installed for use with a leaf spring mounted under the axle. Most think you can simply rotate the axle to move the spring seats on top but this cannot be done as the axle has a slight bend to help dissipate the weight when loaded.
view full answer... - Correct Bestop Trektop NX Soft Top for a 2020 Jeep Wrangler 2 and 4 Door Models
- The correct Bestop Trektop NX Soft Top for a 2020 Jeep Wrangler Unlimited is part # B5686335 which is for four door models. The correct Bestop Trektop NX Soft Top for a 2020 Jeep Wrangler is part # B56862-17 which is for two door models.
view full answer... - Does Dummy Axle RKY1082 Fit RockyMounts DropTop
- What do you mean used with the top?
view full answer... - Will the Soft Top Hardware from a 2003 Jeep Wrangler Fit on a 2001 Jeep Wrangler Sahara
- As long as the soft top hardware from your friends 2003 Jeep Wrangler is the factory soft top hardware or the Bestop Supertop, SupertopNX or Sunrider hardware, then it will fit on your 2001 Jeep Wrangler with the Sahara trim package.
If the soft top hardware is from another manufacturer, then I would recommend contacting that manufacturer for compatibility.
If you will be receiving the factory hardware, then you could install the Bestop Replace-A-Top, # B5118037, that you referenced....
view full answer... - Replacement Rear Window For 2003 Jeep Wrangler Soft Top
- I contacted Bestop and their window kits will replace your factory rear window on the 2003 Jeep Wrangler. If you check the driver's side panel and there is a zipper pull then your soft top was produced in 2002 and you need the 1997-2002 Jeep Replace-A-Top part # B5812115. If you check the driver's side panel and there is not a zipper you would use the 2003-2006 Jeep Replace-A-Top part # B5812835. These kits come with both the rear and side windows. They are not available individually at...
view full answer... - Will Rhino Rack T-Bolts RR54TB Fit in Thule Top Track
- Yes, the replacement M8 T-bolt part # RR54TB would fit in the tracks of a Thule Top Track like the part # THTB60.
view full answer...
Go To Results